User Manual

Eddy User's Guide
44
Main features for WAN Configuration is as follows.
Menu
Default
Descriptions
Device
Name
Eddy
Name of the current device
Line Type
Static IP
IP obtaining method for Eddy’s network connection.
IP Address
192.168.0.223
Current IP address Eddy is assigned to.
(When line type is Static IP, manually enter an appropriate IP
address. When line type is DHCP, current IP is displayed, but it is
not editable.)
Subnet
Mask
255.255.255.0
Current subnet mask Eddy is assigned to.
(When line type is Static IP, manually enter an appropriate subnet
mask. When line type is DHCP, current subnet mask is displayed,
but it is not editable.)
Gateway
192.168.0.254
Current default gateway Eddy is assigned to
(When line type is Static IP, manually enter an appropriate default
gateway. When line type is DHCP, current default gateway is
displayed, but it is not editable.)..
DNS
168.126.63.1
Domain Name Service IP address
Main features for LAN Configuration is as follows.
 Since S4M doesn’t have LAN port, doesn’t include bellows
Menu
Default
Descriptions
DHCP
Server
Enable
Enable or disable DHCP server.
IP Address
10.10.1.1
Current IP address for LAN is assigned to.
Subnet
Mask
255.255.255.0
Current subnet mask for LAN is assigned to.
Lease Start
Address
10.10.1.2
If DHCP server is enabled, start address of the DHCP scope for
leasing.
Lease End
Address
10.10.1.30
If DHCP server is enabled, end address of the DHCP scope for
leasing.
Lease Time
180
DHCP lease time.