User Manual

Eddy User's Guide
43
SNMP Settings
Configure detailed operation environment for SNMP.
Change Password
Change ID and password for both Web and Telnet interface.
Update Firmware
Update Eddy’s firmware.
Factory Default
Restore all the factory default settings.
Save & Reboot
Save the configurations and reboot Eddy.
5.3 Network Settings
Configure general network environment and network management. After changing values, you need to click ‘S
ubmit’ button. Then you will see the same page with modified values. Please note that you have to ‘Save &
Reboot’ in order to see these changes in effect. Changes will be discarded if you do not save current settin
gs.
 Since S4M doesn’t support LCD, ‚LAN Configuration‛ doesn’t appear.