User Manual

Eddy User's Guide
37
◆ Connection via Detector
By running the Detector program in the Utility & Documents CD included in the Eddy package, you can dynam
ically search for all Eddy modules on the network and connect to any module. (For more information on Detect
or, please refer to the Portview manual in the Utility & Documents CD included in the Eddy package)
After running Detector, click Search button on the top-left to display all Eddy modules on the network. Select t
he module that you would make a connection to, and click Telnet or Web to connect to the module via Telnet
or Web, respectively.
If Eddy module is not on the same network as the PC you are working on, use ‚IP Configure‛ button to te
mporarily assign an IP address that you would like to make a Web or Telnet connection to. If you assign a te
mporary IP address to Eddy, you need to to change the IP address and restart in Web or Telnet.
Now you are ready to connect to Eddy! There are three options to configure Eddy.
1) Web
You can easily configure Eddy with web interface, accessible from any web browser. For more information, ple
ase refer to
Chapter 5. Configuration via Web.
2) Telnet
You can configure Eddy with commands after accessing Eddy through Telnet. For more information, please ref
er to
Chapter 6. Configuration via Telnet.
3) Portview
You can use a Windows-based utility Portview from SystemBase to monitor Eddy. For more information on usi
ng the utility for your administration purpose, please refer to Portview User Guide.