User Manual

Eddy User's Guide
36
◆ Factory default alias IP address: 10.10.1.1
In case you configure Eddy to use DHCP to obtain an IP address automatically, you might find it hard to kno
w the IP address to connect to. To provide users with an easier way to know the current IP address, Eddy ha
s a fixed alias IP that is always accessible. Use the address below whenever you cannot find out Eddy’s IP
address.
In order to connect with this address, you need to change network configurations so that your PC can connect
to the IP 10.10.1.1. Please refer to an example below, and note that values do not necessarily have to be ide
ntical to the example below.
 Since Eddy-S4M doesn’t support LAN port so that doesn’t include bellow.