User's Manual

Eddy User's Guide
58
def ftp
[Enable / Disable]
Enable
Enable or disable FTP service.
If disabled, you cannot connect to Eddy via FTP.
def ssh
[Enable / Disable]
Disable
Enable or disable SSH service.
If enabled, you can connect to Eddy via SSH.
Def ddns
[IP Address]
203.32.117.1
If you set DDNS server IP , DDNS service will be enable. But you set
“0.0.0.0” ,this service will disable.
Def ddnsuser
[username]
eddy You can access DDNS server with this ID.
Def ddnspass
[password]
99999999 You can access DDNS server with this password.
def web
[Enable / Disable]
Enable
Enable or disable Web service.
If disabled, you cannot connect to Eddy via Web.
def target_agent
[Enable / Disable]
Disable
Enable or disable remote debugging function used by Eddy development
environment, LemonIDE.
For more information, please refer to LemonIDE user manual in the SDK CD
included in Eddy DK package.
def name
<Eddy name>
Name of the module Set the name of Eddy module. (Max 32 bytes)
def snmp
[Enable / Disable]
Disable
SNMP V1/2 Attributes can read and write by SNMP Agent. In order to read
attributes only, change the feature to "ReadOnly.”
In order to read and write attributes change the feature to "ReadWrite.”
(Options : ReadOnly/ ReadWrite)
def v1readwrite
[enable, disable]
Disable
SNMP V1/V2 Attributes can read and write by SNMP Agent.
In order to read attributes only change the feature to "ReadOnly.”
In order to read and write attributes change the feature to "ReadWrite.”
(Options : ReadOnly/ ReadWrite)
def v3readwrite
[enable, disable]
Disable
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only change the feature to "ReadOnly.”
In order to read and write attributes change the feature to "ReadWrite.”
(Options : ReadOnly/ ReadWrite)
def v3username
[string]
eddy Configure the Username when use SNMP V3.
def v3password
[string]
none Configure the password when use SNMP V3.
def trapip
[address]
0.0.0.0 Configure the server IP address which receives the TRAP information.
def trapoprt
[Socket No.]
162 Configure the server Port which receives the TRAP information.
def trap_reset
[enable, disable]
Enable If Enable is selected, inform the "System reset info".