eCAN_UserManual_Eng_DM v1.0.1
eCAN
User Manual
37
Example of Use
1. Connect two eCANViews to the network and set them up as below.
eCAN1 = TCP Server - 192:168:0;225:4001, 250kbps, set Spec B and reboot
eCAN2 = TCP Server - 192:168:0;226:4001, 250kbps, set Spec B and reboot
2. Connect the CAN ports of eCAN1 and eCAN2 through the cable.
3. Run eCANView.
4. Select the Action – Connect menu.
5. Select the Network tab, specify the address and Port No. so you can connect to eCAN1, and press the [Connect]
button.
6. Check the information on the bottom Status bar to ensure that it is connected properly.