eCAN_UserManual_Eng_DM v1.0.1

eCAN
User Manual
35
6. eCANView
This chapter briefly describes how to test sending and receiving CAN Frames using eCANView.
Main Window Configuration
Action: Selects Connect(Ethernet/VCP) or Disconnect.
Help: Selects the About menu.
Format: Selects the type of CAN Frame.
ID: Specifies the ID of CAN Frame
DLC: Specifies the Data length of CAN Frame
Data: Specifies the CAN Frame Data to Hex value.
TX Count: Counts CAN frames sent from eCANView to eCAN.
RX Count: Counts CAN frames sent from eCAN to eCANView..
Interval: Sets the auto transmission mode and period.
Send: Forward configured CAN frames to eCAN.
Request Interval: The interval which error status information is requested.
Request: Starts or stops the Error Status information request.
Stop: Stops the output of the CAN Frame on the screen.
Clear: Initialize the CAN Frame, TX Count and RX Count output on the screen.