eCAN_UserManual_Eng_DM v1.0.1

eCAN
User Manual
17
(5) Filter Setting
You can set the SW Filter for the eCAN.
SW Filter is a feature that blocks a single ID unlike ID and MASK, and can set up to 32 SW Filter.
If you specify the ID and properties to filter, only those IDs will not be received.
Set the SW Filter value for CAN ports in Filter Setting. You can set the ID and Properties to filter by electing the
filter number in the combo box at the bottom of the setting page. After changing After changing the settings, you
must press the [Submit] button to save the changed value and restart it through the Reboot menu to apply it to the
actual equipment operation. If you exit without saving the changes, the changed value will be lost.