BASSO-1010D2_ISO_SpecSheet_Eng_DM v1.0.1

© SystemBase Co., Ltd.
16F, Digital-ro 288, Guro-gu, Seoul, Republic of Korea 08390
Tel [phone] | Fax [phone] | www.sysbas.com
Specifications subject to change without notice
Overview
In factories or poor sites, noise or surges generated from outside and incoming along the communication lines
frequently cause communication errors, and this continuous electrical shock poses the risk of damaging expensive
equipment and facilities.
BASO-1010D2/ISO on the System Base is a product that provides high performance and reliability to maintain and
utilize facilities and equipment by reducing failures or breakdowns through the built in protection against noise and
surge incoming along the RS232 line.
Specification
Serial
Standard RS-232
Serial Port
Primary: DCE(DB9 Female)
Secondary: DTE(DB9 Male)
Signals TXD, RXD, RTS, CTS (DTR for Power source)
Baud Rate Max. 921.6kbps
Protection
ESD
Contact–Min: ±8kV
Contact–Max: ±15kV
Air–Min: ±15kV
Air–Max: ±30kV
Peak Pulse Current
(tp = 8/20 μs)
Max. 12A
Peak Pulse Power
(tp = 8/20 μs)
Max. 350W
Standards
IEC 61000-4-2
IEC 61000-4-4
IEC 61000-4-5
Hardware
Power Requirement Default: No Power, Option: Pin no.9 (5~12V)
LED PWR(Red), RXD(Red), TXD(Green)
Dimension (W x L x H) 34.9 x 77.4 x 16.5mm (1.37 x 3.05 x 0.65in)
Weight 32.5g (1.15oz)
Operating Temperature
-40 ~ 85℃ (-40 to 185℉)
Storage Temperature
-40 ~ 85℃ (-40 to 185℉)
Humidity 5~90% Non-condensing
Ordering Information BASSO-1010D2/ISO