GENIOX VOCLEAN IOM

31Information About the Residual Risks
Hazards/dangerous area:
• Sharp edges on plates might occur inside the machines as well as sharp edges on frames of dampers. No sharp edges on the
outside of the units.
Hazards/dangerous area:
• Sharp edges on plates might occur inside the machines as well as sharp edges on frames of dampers. No sharp edges on the
outside of the units.
Dangerous incident:
• Cutngers/hands.
Claim for reduction of danger:
• Risk only exists during maintenance and cleaning. This takes place at least once every year. Use of gloves and hel¬met is
described in this manual. Cut-resistant gloves for protection against injury from sharp metal plate edges. Use CE-marked gloves
 forthispurpose.Lampsmountedinsidetheunitwithsufcientlightingreducetheriskofinjury.
Hazards/dangerous area:
• Are between the damper blades and the system of bars and links between motor and damper blades.
Dangerous incident:
• Crushingofngers.
Claim for reduction of danger:
• Risk only exists during maintenance and cleaning. This task must be done by skilled technicians that are aware of this risk.
Hazards/dangerous area:
• Highconcentrationofdustonthesurfaceofthebafesmightbeharmfultothehealth.
Dangerous incident:
• To breathe in particles that is harmful to the health.
Claim for reduction of danger:
• Risk only exists during maintenance and cleaning. This takes place at least one time every year. Use of particulate respirator is
described in this manual. Particulate respirator- maintenance free including foam face-seal and adjust¬able pre-threaded
 headbands(sameparticulaterespiratorasrecommendedforchangeoflters).
L.1.2 Common for all unit sections
L.1.2.1 Risk caused by surfaces, edges and corners
L.1.2.2 Risk caused by maintenance and cleaning of dampers
L.1.2.3 Risk caused by maintenance and cleaning of attenuators