GENIOX VOCLEAN IOM

20
H.2.10 Installation of the EPA/HEPA Filter
H.2.11 Installation of Active Carbon Filter Cartridges
RailshavebeenmountedwithinthesectiontoenableinstallationoftheEPAandHEPAlters.
TheEPAandHEPAltersshouldbeslidinaverticalpositionontheserailswithinthesection,asshownin“Figure17”.
Theplatesonwhichtheactivatedcarboncartridgesaretobeinstalledarexedinsidethesectionatourfactory.Thecartridgesare
sentwithinapackageforinstallationonsite.Thisplatehasslotsforinstallingcartridges,asseenin“Figure28”.Thepinsoneach
cartridgeshouldbeplacedinthewidesectionoftheslotsontheplate.Thentheapparatusseenin“Figure19”shouldbeplaced
on the holes on the other side of the cartridges, and the apparatus should be held from the lever and rotated making sure the slots
slide over the narrow section.
Figure 17: Installation of EPA/HEPA and Bag Filters
Figure 18: The appearance of EPA/HEPA and bag
lters after lter installation
Figure 19: Active Carbon lter catridge and
connecting plate
Figure 20: Mounting apparatus for the active
carbon lter
Installation