GENIOX VOCLEAN IOM

17
The sections are then to be positioned directly opposite each other. If the
sections are built with legs, the adjust¬able feet can be used to get the
sections in line and at the same height.
Pressthesectionshardtogethersothattherubberpro¬lesaresoat
that the iron frames of the two sections are joined. Strap with tensioner
is suitable for pressing the sections hard together.. Note! Do not place the
strapontheverticalproles.Thestrapmustbecarefullyplacedonthe
bottomprolesoftheunit.
The sections must then be locked permanently together with 8 mm bolts
and nuts through the grey guiding and connection blocks. Systemair have
provided you the 8 mm bolts with round heads and nuts required to carry
this task out. An Allen key - size 6 - will be required.
Figure 13. Section Mounting
Installation