Geniox NA Product Guide Specification
Systemair
Geniox
Series
Semi Custom AHU
Item#
23
72
13
-
10
H.
Warranty Documentation: Submit manufacturer’s standard warranty.
1.6
QUALITY ASSURANCE
A.
Manufacturer’s Qualifications:
1.
Manufacturer regularly engaged, for past 25 years, in manufacture of air handling units
of
similar type to that specified.
2.
(VRF if applicable) Manufacturer shall have minimum 7 years of experience working
with VRF components and units.
B.
Installer's Qualifications:
1.
Installer regularly engaged, for past 25 years, in installation of air handling units of
similar type to that specified.
2.
Employ persons trained for installation of air handling units.
1.7
SAFETY AGENCY LISTED & CERTIFICATION
A.
Air handling units shall conform to UL Standard 1995 and CAN/CSA Standard C22.2 No. 236
requirements and shall be listed with pertinent certifying body.
B.
Air handling unit water heating and cooling coils shall be certified in accordance with the
forced circulation air cooling and air heating certification program, which is based on AHRI
Standard 410.
1.8
DELIVERY, STORAGE, AND HANDLING
A.
Delivery Requirements: Deliver materials to site in manufacturer’s original, stretch
wrapped, unopened
containers and packaging, with labels clearly identifying product
name and manufacturer.
B.
Storage and Handling Requirements:
1.
Store and handle materials in accordance with manufacturer’s instructions.
2.
Keep materials in manufacturer’s original, unopened containers and packaging
until
installation.
3.
Store materials in clean, dry area indoors.
4.
Protect materials during storage, handling, and installation to prevent damage.
1.9
WARRANTY
A.
Geniox Limited Warranty Systemair warrants the Equipment manufactured by Systemair for a
period of the lesser of 12 months from initial start-up or 18 months from date of shipment,
whichever is less, against failure due to defects in material and manufacture and that it has
the capacities and ratings set forth in Company's catalogs and bulletins ("Warranty").
Should any failure to conform to the above appear within the lesser of 12 months from initial
start-up or 18 months from date of shipment, whichever is less, the unit manufacturer shall
upon prompt notification thereof during the Warranty Period and confirmation to the unit
manufacturer’s satisfaction that the goods have been stored, installed, operated and
maintained properly and in accordance with standard industry practice, correct the non-
conformity at the unit manufacturer’s option either by repairing any defective part or parts or