UserManual GenioxCore 250320

Installation of steel roof of trapezoidal plates in the sizes 10 – 31 |
4-5
this length of the total roof for RL and we call the total length of the complete unit for AL. The trapezoidal roof must
always be longer than the unit, to obtain a reasonable overhang called – XX - of the roof at both ends.
In the table below you will find 40 different lengths of roofs (always changing with the 205 mm) and the lengths of
units that are ideal for each of the 40 alternative roof lengths.
Measure the total length – AL of the unit – for example 5000 mm between the 4982 and 5182 mm mentioned in the
table below.
AHU length
AL
Roof length
RL
AHU length
AL
Roof length
RL
AHU length
AL
Roof length
RL
1670 – 1870 2100 4568 – 4768 4970 7466 – 7666 7840
1877 – 2077 2305 4775 – 4975 5175 7673 – 7873 8045
2084 – 2284 2510 4982 – 5182 5380 7880 – 8080 8250
2291 – 2491 2715 5189 – 5389 5585 8087 – 8287 8455
2498 – 2698 2920 5396 – 5596 5790 8294 – 8494 8660
2705 – 2905 3125 5603 – 5803 5995 8501 – 8701 8865
2912 – 3112 3330 5810 – 6010 6200 8708 – 8908 9070
3119 – 3319 3535 6017 – 6217 6405 8915 – 9115 9275
3326 – 3526 3740 6224 – 6424 6610 9122 – 9322 9480
3533 – 3733 3945 6431 – 6631 6815 9329 – 9529 9685
3740 – 3940 4150 6638 – 6838 7020 9536 – 9736 9890
3947 – 4147 4355 6845 – 7045 7225 9743 – 9943 10095
4154 – 4354 4560 7052 – 7252 7430
4361 - 4561 4765 7259 - 7459 7635
The mentioned length of roof – RL - for this length of unit is 5380 mm (the delivered trapezoidal plates can be
combined to this length - RL = 5380 mm). 5380 mm minus 5000 mm is 380 mm overhang for both ends, and 380/2
mm = 190 mm is the overhang for each end. Place the trapezoidal roof plate F1 with the roof overhang profile G1 on
rail E with an overhang of 190 mm.
4.1.5 Foam bands between rails and roof plates – mount roof plates.
Place foam bands P between profiles A1, B2, C3, D4 and roof plates.
output |