Geniox Core Knock Down Ready

2
| Section with rotary heat exchanger
C Section with rotary heat exchanger
Scan the QR code to watch a video showing the disassembling and reassembling process.
The unit is built without the use of rivets and without mastic between casing parts for easy and quick removal of panels
from profiles and internal walls.
Remove doors, panels and profiles to offer good access for the demounting and removal of internal parts.
Internal parts to be removed are walls with fans, walls with filters, cables, control components, cabinet with controller
and rotary heat exchanger.
Reassemble the parts of the casing and reinstall the components in the opposite sequence of the separation.
Note:
During reassembly of the unit, application of the delivered mastic and placing of the delivered self-adhesive
flexible lists according to the below guidelines is important in order to achieve the air-tightness that
corresponds to Eurovent certified values.
Note:
Do not separate the section with only fan and filter if doors in the building are sufficiently wide — 800 mm
wide, because the width of this section does not exceed 800 mm. The width of the section with fan, filter,
rotary heat exchanger and cabinet with control system exceeds 800 mm, and separation, as well as
reassembly is described below.
output |