Geniox Core Knock Down Ready

14
| Section with counterflow heat exchanger
D Section with counterflow heat exchanger
Scan the QR code to watch a video showing the disassembling and reassembling process.
The unit is built without the use of rivets and without mastic between casing parts for easy and quick removal of panels
from profiles and internal walls.
Remove doors, panels and profiles to offer good access for the demounting and removal of components.
Reassemble the parts of the casing and reinstall the components in the opposite sequence of the separation.
Note:
During reassembly of the unit, application of the delivered mastic and placing of the delivered self-adhesive
flexible lists according to the below guidelines is important in order to achieve the air-tightness that
corresponds to Eurovent certified values.
Note:
Do not separate the sections with fans, filters and cabinet with control system if doors in the building are
sufficiently wide — 800 mm wide, because the width of this section does not exceed 800 mm. The width of
the section with the counterflow heat exchanger exceeds 800 mm, and separation, as well as reassembly is
described below.
output |