Geniox user manual

output | 11
Contents
A Manufacturer....................................................................................................................................1
B Name of machines.............................................................................................................................1
C General descriptions, dangers and warnings ............................................................................................2
C.1 Overview via pictograms on the inspection side of the unit ...............................................................2
C.1.1 Where are pictograms placed on the units.........................................................................2
C.1.2 Weight of each section and production number – example for the Geniox unit...........................5
C.1.3 CE label — example for the Geniox unit ............................................................................5
C.1.4 Pictograms about warnings and dangers on the units ..........................................................6
C.2 Data about the unit according to cards and labels in and on the unit ....................................................6
C.2.1 Example of Machine card with unique data on every unit .....................................................6
C.2.2 Label with data about the cabinet — example.....................................................................7
C.2.3 Flowchart – example of the label placed on or with the cabinet ..............................................7
C.2.4 Symbols in the flowchart and explanation about the symbols ................................................8
C.2.5 Example of label placed on or with the cabinet – Terminal plan for external components .............9
C.2.6 Control board for Systemair Access control system............................................................ 10
C.3 Hand terminal, if the unit is delivered with control system............................................................... 11
C.4 Dimensions of the units .......................................................................................................... 11
C.5 Ordinary automatically operation – only manual operation by new parameters.................................... 11
D Drawings, diagrams, guides and instructions for the use, maintenance and repair........................................... 11
E Employees in charge of operation/control/maintenance .......................................................................... 11
F Intended use and range of applications ................................................................................................. 11
G Unintended use and misuse – inappropriate applications for the machine ..................................................... 12
G.1 Air handling unit in operation ................................................................................................... 12
H Instructions for unloading on the site as well as installation and connection .................................................. 12
H.1 Unloading on the site.............................................................................................................. 12
H.1.1 Handling methods ..................................................................................................... 12
H.1.2 Unloading by fork-lift truck .......................................................................................... 13
H.1.3 Unloading by crane .................................................................................................... 13
H.1.4 Transport of unit without base frame on the site............................................................... 13
H.1.5 Lifting a unit with straps.............................................................................................. 13
H.1.6 Lifting a unit with installed brackets on the base frame for lifting.......................................... 14
H.1.7 Lifting a unit without base frame and legs but with installed brackets for lifting. ...................... 14
H.1.8 Handling a unit with holes in base frame for forks ............................................................ 15
H.1.9 Roof unit with PVC or bitumen roof................................................................................ 17
H.1.10 Roof unit with steel roof ............................................................................................. 17
H.1.11 Pre-assembly storage................................................................................................. 17
H.1.12 Tilt less than 30˚ during transportation of the section with heat pump ................................... 18
H.1.13 Transport and pre-installation storage of rotary heat exchanger — always in vertical
position................................................................................................................... 18
H.2 Installation - mechanical ......................................................................................................... 18
H.2.1 Free area in front of and above the unit .......................................................................... 18
H.2.2 Supporting surface..................................................................................................... 18
H.2.3 Adjustable feet under legs or base frame and transport of sections....................................... 18
H.2.4 Base frame assembly ................................................................................................. 19
H.2.5 Base frames for outdoor units ...................................................................................... 19
H.2.6 Outdoor units — support under the base frame of the unit .................................................. 19
H.2.7 Installation on the site of unit sections at the base frame when sections are delivered on
pallets..................................................................................................................... 19
H.2.8 Joining the AHU sections ............................................................................................. 21
H.2.9 Fitting the ductwork................................................................................................... 24
H.2.10 Risk of stack effect by vertical ducts and wind pressure on louvers ....................................... 25
H.2.11 Remove transport brackets – when spring mounts are installed............................................ 25
H.2.12 Refitting of guards ..................................................................................................... 26
H.2.13 Lock the doors by using the key.................................................................................... 27
H.2.14 Overhang support...................................................................................................... 27
H.3 Installation - electrical ............................................................................................................ 27
H.3.1 Description............................................................................................................... 28
H.3.2 Wiring diagrams ........................................................................................................ 28
H.3.3 Installation of mains power supply ................................................................................ 28