Geniox user manual

Table Of Contents
Instructions for unloading on the site as well as installation and connection |
13
H.1.2 Unloading by fork-lift truck
The forks of the truck must be sufficiently long to avoid any damage to the AHU underside.
H.1.3 Unloading by crane
AHU delivered on transport pallet must be lifted by straps as shown in the illustration.
Caution
Do not use the feet as lifting points, as this may cause damage tho the air handling unit.
H.1.4 Transport of unit without base frame on the site
Units without base frame are always delivered in sections with each section on a pallet. Sections can be transported on
the site by hand manual forklifts.
H.1.5 Lifting a unit with straps
Use an appropriate lifting beam with a sufficient span to avoid that the straps touch and damage the drip nose profiles
and the inspection side with handles, pipes and accessories for example manometers, cabinets, tabs for measuring
the pressure.
output | 11