Geniox GO User manualv7.2
Table Of Contents
- A Manufacturer
- B Name of machines
- C Declaration of Conformity
- D General descriptions, dangers and warnings
- E The control panel for the control system.
- F Drawings, diagrams, guides and instructions for the use, maintenance and repair
- G Employees in charge of operation/control/maintenance
- H Unintended use and misuse – inappropriate applications for the machine
- I Instructions for unloading and handling on site
- J Installation
- J.1 Installation - mechanical
- J.1.1 Free area in front of and above the unit
- J.1.2 Supporting surface
- J.1.3 Adjustable feet under legs or base frame and transport of sections
- J.1.4 Base frame assembly
- J.1.5 Base frames for outdoor units
- J.1.6 Outdoor units — support under the base frame of the unit
- J.1.7 Installation on the site of unit sections at the base frame when sections are delivered on pallets
- J.1.8 Joining the unit sections
- J.1.9 Fitting the ductwork
- J.1.10 Risk of stack effect by vertical ducts and wind pressure on louvers
- J.1.11 Door alignment
- J.1.12 Lock the doors by using the key
- J.2 Installation - electrical
- J.3 Installation – Pipes for water – hot and chilled, valves and drains
- J.1 Installation - mechanical
- K Installation and assembly instructions for reduction of noise and vibration emissions
- L Start-up, adjustments, use and commissioning
- M Information about the residual risks
- N Instructions on the protective measures during repair and maintenance
- O The essential characteristics of tools which may be fitted to the machinery
- P The conditions of stability during use, transportation, assembly, dismantling when out of service
- Q Instructions for machinery where these are regularly to be transported
- R The operating method to be followed in the event of breakdown. Safe restart.
- S Adjustment and maintenance operations
- T Instructions to enable adjustment and maintenance safely
- U Information on airborne noise emissions exceeding 70 dB(A)
- Annex 1 Technical data – unique data for every unit (in separate cover)
- Annex 2 Assembly of base frame – height 118 mm for unit sizes 10 – 18
- Annex 3 Assembly of base frame – height 118 mm for unit sizes 20 – 27
- Annex 4 Assembly of base frame – height 218 mm for unit sizes 10 – 18
- Annex 5 Assembly of base frame – height 218 mm for unit sizes 20 – 27
- Annex 6 Installation of steel roof in the sizes 10 – 31
- Annex 7 Speed control for rotor and assembly of divided rotor
- Annex 8 Reversible heat pump unit (in separate cover, if heat pump was delivered)
- Annex 9 Menu for internal controller in the heat pump unit (in separate cover, if heat pump was delivered)
- Annex 10 Connection of fan motor and set-up manual for frequency converter
- Annex 11 Commissioning protocol (in separate cover)
- Annex 12 Report with data from final functional test on the Systemair factory
- Annex 13 Short description of main components in the control system
- Annex 14 Wiring diagram (in separate cover)
- Annex 15 Operator’s guide (How to use the Systemair control panel) (in separate cover)
54
|
Length profile type C1 Length profile type C2
Corner A
Splice B
Adjustable length of
frame — L [mm]
Quantity
Length
[mm]
Quantity
Length
[mm]
Quantity Quantity
3182-3264 3 1500 3 1600 6 3
3282-3364 3 1600 3 1600 6 3
3382-3464 3 1600 3 1700 6 3
3482-3564 3 1700 3 1700 6 3
3582-3664 3 1700 3 1800 6 3
3682-3764 3 1800 3 1800 6 3
3782-3864 3 1800 3 1900 6 3
3882-3964 3 1900 3 1900 6 3
3982-4064 3 1900 3 2000 6 3
4082-4164 3 2000 3 2000 6 3
4182-4264 3 2000 3 2100 6 3
4282-4364 3 2100 3 2100 6 3
4382-4464 3 2100 3 2200 6 3
4482-4564 3 2200 3 2200 6 3
4582-4664 3 2200 3 2300 6 3
4682-4764 3 2300 3 2300 6 3
4782-4864 3 2300 3 2400 6 3
4882-4964 3 2400 3 2400 6 3
3.3 Base frame length 4982 – 6164 [mm] Unit size 20 – 27
End profile type D (width of base frame)
Middle profile type D1
Spacer F
Unit size Quantity
Length [mm]
Quantity
Length [mm]
Quantity
Geniox GO20 2 2070 4 941 2
Geniox GO22 2 2270 4 1041 2
Geniox GO24 2 2470 4 1141 2
Geniox GO27 2 2770 4 1291 2
211728 | v7.2