ERP Data+SYSPLIT WALL OUT 09 INV32 HP Q 315809

8
The display
shows
x 4
x 1
x 1
x 1
x 4
x 1
x 1
1.
1.
2.
2.
3.
3.
4.
4.
5.
5.
6.
6.
7.
7.
8.
8.
9.
The display is lit up
The display is lit up
Time settings
Time settings
Select Timer Normal speed (example). (Do not
select Time/Date, because this is the Calendar
setting – time, date, weekday of the internal
clock in the controller)
Conrm selected value with OK.
Value to be changed ashes.
Return to menu to select: Timer Normal
Speed or Timer Reduced Speed and so on.
Conrm selected value with OK. The system
will automatically return to the start menu
after some minutes.
Select Time/Date (this menu permits the
setting of time and date in the internal
clock)
Time: aa:aa is activated for changes.
Value to be changed ashes
Conrm with OK when all values are OK. The
system will automatically return to the start
menu after some minutes..
To select the correct value.
Conrm with OK.
Schedule settings
Normal Speed
Monday
Per 1: 09:00 - 16:00 (Periode 1)
Per 2: 16:00 - 21:00 (Periode 2)
Monday
Per 1: 07:00 - 1700 (Periode 1)
Per 2: 17:00 - 07:00 (Periode 2)
Time: aa:aa
Date: bbbb-bb-bb
Weekday: Xxxxxxxxx
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., O)
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., O)
Time/Date
Timer Normal Speed
Timer Reduced Speed
Extended running
Holidays
Time/Date
Timer Normal Speed
Timer Reduced Speed
Extended running
Holidays
Calender settings (time, date, weekday)
 
To return to the start menu at once
– press and several times.
Follow the steps
below