DV QuickGuide uk 06 2015 V5

Automatik
Danvent DV can be supplied with a pre-assembled and fully tested control
system. The control system is a user-friendly system, where functions
and parameters are selected from the external control panel. The control
panel can be positioned freely and used as a remote control. The most
important operating data are continuously displayed on the control panel
display, including alarms, operating values, operating status and time
settings. Commissioning is simplified, as the control system is preloaded
with temperatures, time settings and control sequences. The settings can
easily be changed if desired.
Functions:
• Weekly clock.
• Select between:
• Temperature control: Cascade room control, fixed supply air tempera-
ture, outdoor compensated supply air temperature, outdoor tempera-
ture dependent change between room control and supply air control.
• Airflow control: 2 fixed airflows, constant duct pressure (VAV),
constant duct pressure with extract air as slave.
• Extended operation.
• Free night cooling.
• Cooling recovery.
• Filter guard for supply and extract air.
• Alarm and safety functions.
• Readout of fan data: Airflow and pressure.
• Water heating coil, control and frost protection.
• Electric heating coil, modulating with protection
against overheating as well as control.
• Cooling coil, control.
• Run-around coil heat exchangers, control.
• Recirculation.
• Heating and cooling valves incl. actuator.
• Control/communication of DVU-HP heat pump.
• Supply air and extract air dampers as well as damper motors.
• External fire signal.
• Co
2
/temperature control.
• Humidity control.
BMS communication configured via the control panel:
• Integrated BACnet IP or MS/TP.
• Integrated Modbus RTU via RS485 or TCP/IP.
• Updated WEB master standard.
• LON is possible.
Control System Corrigo