DV QuickGuide uk 06 2015 V5

Certificates
Systemair strives constantly to
improve the energy saving, technical
and mechanical quality of Danvent
DV. The unit is certified and approved
on a number of important points.
Eurovent certification
Danvent DV air handling units are
Eurovent certified. This ensures the
conformity between the calculated
performance in SystemairCAD design
programme, and the measured per-
formance at independent test labora-
tories. Certificate 07.02.339.
Machinery directive
Danvent DV air handling units are
manufactured according to the safety
demands of the EU Machinery
Directive 2006/42/EF. This is con-
firmed through the issurance of cor-
responding Declaration of
Incorporation for units without
control system, and corresponding
Declaration of Conformity and CE
label for units with factory installed
control system.
ISO 9001:2008 certification
Danvent DV air handling units are
developed and manufactured in
Denmark. The factory’s quality
management system is certified
according to the standard EN ISO
9001:2008 by Bureau Veritas
Certification.
Eurovent energy classification
Danvent DV air handling units are
energy classified according to
Eurovent’s guidelines for air handling
units RS 6/C/005–2015. The energy
class expresses the unit’s total ener-
gy consumption. The energy class is
calculated by the design programme
SystemairCAD based on the actual
data of the designed unit.
Classifications
The performance of the air handling
unit casing corresponds with the fol-
lowing classifications according to
the European standard EN 1886,
2. edition 2008.
Mechanical strength
Class D2
Casing air leakage
Negative pressure:
- 400 Pa: Klasse L2
Positive pressure:
+ 700 Pa: Klasse L2
Filter by-pass leakage
Negative pressure:
- 400 Pa: Klasse F9
Positive pressure:
+ 400 Pa: Klasse F9
Thermal transmittance
Class T2
Thermal bridging factor
Class TB3
AHU N
o
07.02.339
DANVENT DV 10-240, TIME 10-40
ENERGY EFFICIENCY
Report to performance data 2014
339
2014
10
|
Quick Guide to Danvent DV