IOM SYSCREW AIR EVO HSE

4
2 - Safety (continued)
DANGER
The guards of the fans (only for units provided
with air heat exchangers) must be always
mounted and must never be removed before
de-energising the appliance.
DANGER
It is the User’s responsibility to ensure that
the unit is fit for the conditions of intended use
and that both installation and maintenance are
carried out by experienced personnel, capable
of respecting all the recommendations
provided by this manual.
It is important that the unit is adequately
supported, as detailed in this manual. Non-
compliance with these recommendations may
create hazardous situations for the personnel.
DANGER
The unit must rest on a base which meets the
characteristics specified in this manual; a
base with inadequate characteristics is likely
to become a source of serious injury to the
personnel.
WARNING
The unit has not been design to withstand
loads and/or stress that may be transmitted by
adjacent units, piping and/or structures.
Each external load or stress transmitted to the
unit may break or cause breakdowns in the
unit’s structure, as well as serious dangers to
people. In these cases, any form of warranty will
automatically become null and void.
WARNING
The packaging material must not be disposed of
in the surrounding environment or burnt.
DANGER
The standard unit is provided with fans
protection grill always factory mounted.
For specific customer requests, mainly due
to limiting transport conditions, it is still
possible the unit is shipped with fans not
fully assembled. In this circumstance, before
switching on the unit, it is mandatory that
the Customer/Installer completes the fans
assembling on field - including fan protection
grills -according to the instructions included
into the manual.