IOM SYSLOOP (IOM SL 01 S 3GB)

ManualsBrandsSystemair ManualsAir ConditionersSL30

Table Of Contents

CONTENTS
1. GENERAL RECOMMENDATIONS
- 1.1. SAFETY DIRECTIONS
- 1.2. WARNING
- 1.3. EQUIPMENT SAFETY DATA
2. INSPECTION AND STORAGE
3. WARRANTY
4. CONTENTS Of PACKAGE
5. DIMENSIONS
6. HANDLING
- 6.1. NET WEIGHT
7. REFRIGERATION SPECIFICATIONS
- 7.1. REFRIGERANT CIRCUIT DIAGRAM
- 7.2. REFRIGERANT CHARGE
- 7.3. FLUOROCARBON GAS REGULATIONS
  - 7.3.1. CALCULATING GREENHOUSE GAS QUANTITIES
8. TECHNICAL SPECIFICATIONS
- 8.1. OPERATING LIMITS
9. ELECTRIC SPECIFICATIONS
- 9.1. ELECTRICAL POWER SUPPLY
10. INSTALLATION
- 10.1. GENERALITIES
- 10.2. CLEARANCE
- 10.3. UNIT LOCATION
11. DUCTING AND NOISE LEVEL REDUCTION
- 11.1. AIR BLOWING FRAME AND RETURN AIR INTAKE FRAME
- 11.2. AIR BLOWING PLENUM AND RETURN AIR INTAKE PLENUM
- 11.3. AIR DISCHARGE MODIFICATION
- 11.4. FILTER ACCESS
- 11.5. VENTILATION
- 11.6. AERAULIC ADJUSTEMENT
  - 11.6.1. MODEL SL15
  - 11.6.2. MODELS SL20 - SL30
12. UNCLAMPING THE COMPRESSOR
13. HYDRAULIC LINKS
- 13.1. WATER QUALITY
- 13.2. RECOMMENDATIONS FOR HYDRAULIC CONNECTIONS
- 13.3. RECOMMENDATIONS FOR CLEANING AND FLUSHING OUT THE SYSTEM
14. WIRING DIAGRAM AND LEGEND
- 14.1. WIRING DIAGRAM
- 14.2. LEGEND
  - 14.2.1. POWER SUPPLY
  - 14.2.2. PRESSOSTATS SETTING
15. ELECTRICAL CONNECTIONS
- 15.1. GENERALITIES
- 15.2. REMOTE CONTROL
  - 15.2.1. WALL MOUNTING
  - 15.2.2. ELECTRICAL CONNECTIONS
16. REGULATION
- 16.1. ORDER OF PRIORITY FOR CONTROL SYSTEMS
- 16.2. WALL-MOUNTED CONTROL
17. FINAL TASKS
18. STARTING - RECOMMENDATIONS - SETTINGS
- 18.1. COMMISSIONING
  - 18.1.1. DEMAND FOR COOLING
  - 18.1.2. DEMAND FOR HEATING
19. MAINTENANCE AND SERVICING
- 19.1. FAULT FINDING
- 19.2. ALARM CODES
20. IN CASE OF WARRANTY - MATERIAL RETURN PROCEDURE
21. ORDERING SERVICE AND SPARE PARTS ORDER
DIMENSIONS
- CONFIGURATION R1.AI RECT/S4.AO RECT
- CONFIGURATION R2.AI RECT/S4.AO RECT
- CONFIGURATION R1.AI 1Ø200/S4.AO RECT OR R1.AI 1Ø200 FAØ100/S4.AO RECT OR R1.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURATION R2.AI 1Ø200/S4.AO RECT OR R2.AI 1Ø200 FAØ100/S4.AO RECT OR R2.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURATION R1.AI RECT/S4.AO 1Ø200 OR R1.AI RECT/S3.AO 1Ø200
- CONFIGURATION R2.AI RECT/S4.AO 1Ø200 OR R2.AI RECT/S3.AO 1Ø200
- CONFIGURATION R1.AI 1Ø200/S4.AO 1Ø200 OR R1.AI 1Ø200 FAØ100/S4.AO 1Ø200 OR R1.AI 1Ø200 FAØ125/S4.AO 1Ø200 OR R1.AI 1Ø200/S3.AO 1Ø200 OR R1.AI 1Ø200 FAØ100/S3.AO 1Ø200 OR R1.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURATION R2.AI 1Ø200/S4.AO 1Ø200 OR R2.AI 1Ø200 FAØ100/S4.AO 1Ø200 OR R2.AI 1Ø200 FAØ125/S4.AO 1Ø200 OR R2.AI 1Ø200/S3.AO 1Ø200 OR R2.AI 1Ø200 FAØ100/S3.AO 1Ø200 OR R2.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURATION AO XLN
WIRING DIAGRAM
- LEGEND
DIMENSIONS
- CONFIGURATION R1.AI RECT/S4.AO RECT
- CONFIGURATION R2.AI RECT/S4.AO RECT
- CONFIGURATION R1.AI 1Ø200/S4.AO RECT OU R1.AI 1Ø200 FAØ100/S4.AO RECT OU R1.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURATION R2.AI 1Ø200/S4.AO RECT OU R2.AI 1Ø200 FAØ100/S4.AO RECT OU R2.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURATION R1.AI RECT/S4.AO 1Ø200 OU R1.AI RECT/S3.AO 1Ø200
- CONFIGURATION R2.AI RECT/S4.AO 1Ø200 OU R2.AI RECT/S3.AO 1Ø200
- CONFIGURATION R1.AI 1Ø200/S4.AO 1Ø200 OU R1.AI 1Ø200 FAØ100/S4.AO 1Ø200 OU R1.AI 1Ø200 FAØ125/S4.AO 1Ø200 OU R1.AI 1Ø200/S3.AO 1Ø200 OU R1.AI 1Ø200 FAØ100/S3.AO 1Ø200 OU R1.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURATION R2.AI 1Ø200/S4.AO 1Ø200 OU R2.AI 1Ø200 FAØ100/S4.AO 1Ø200 OU R2.AI 1Ø200 FAØ125/S4.AO 1Ø200 OU R2.AI 1Ø200/S3.AO 1Ø200 OU R2.AI 1Ø200 FAØ100/S3.AO 1Ø200 OU R2.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURATION AO XLN
SCHEMAS ELECTRIQUES
- LEGENDE
ABMESSUNGEN
- KONFIGURATION R1.AI RECT/S4.AO RECT
- KONFIGURATION R2.AI RECT/S4.AO RECT
- KONFIGURATION R1.AI 1Ø200/S4.AO RECT ODER R1.AI 1Ø200 FAØ100/S4.AO RECT ODER R1.AI 1Ø200 FAØ125/S4.AO RECT
- KONFIGURATION R2.AI 1Ø200/S4.AO RECT ODER R2.AI 1Ø200 FAØ100/S4.AO RECT ODER R2.AI 1Ø200 FAØ125/S4.AO RECT
- KONFIGURATION R1.AI RECT/S4.AO 1Ø200 ODER R1.AI RECT/S3.AO 1Ø200
- KONFIGURATION R2.AI RECT/S4.AO 1Ø200 ODER R2.AI RECT/S3.AO 1Ø200
- KONFIGURATION R1.AI 1Ø200/S4.AO 1Ø200 ODER R1.AI 1Ø200 FAØ100/S4.AO 1Ø200 ODER R1.AI 1Ø200 FAØ125/S4.AO 1Ø200 ODER R1.AI 1Ø200/S3.AO 1Ø200 ODER R1.AI 1Ø200 FAØ100/S3.AO 1Ø200 ODER R1.AI 1Ø200 FAØ125/S3.AO 1Ø200
- KONFIGURATION R2.AI 1Ø200/S4.AO 1Ø200 ODER R2.AI 1Ø200 FAØ100/S4.AO 1Ø200 ODER R2.AI 1Ø200 FAØ125/S4.AO 1Ø200 ODER R2.AI 1Ø200/S3.AO 1Ø200 ODER R2.AI 1Ø200 FAØ100/S3.AO 1Ø200 ODER R2.AI 1Ø200 FAØ125/S3.AO 1Ø200
- KONFIGURATION AO XLN
STROMLAUFPLANS
- ERLÄUTERUNG
DIMENSIONI
- CONFIGURAZIONE R1.AI RECT/S4.AO RECT
- CONFIGURAZIONE R2.AI RECT/S4.AO RECT
- CONFIGURAZIONE R1.AI 1Ø200/S4.AO RECT O R1.AI 1Ø200 FAØ100/S4.AO RECT O R1.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURAZIONE R2.AI 1Ø200/S4.AO RECT O R2.AI 1Ø200 FAØ100/S4.AO RECT O R2.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURAZIONE R1.AI RECT/S4.AO 1Ø200 O R1.AI RECT/S3.AO 1Ø200
- CONFIGURAZIONE R2.AI RECT/S4.AO 1Ø200 O R2.AI RECT/S3.AO 1Ø200
- CONFIGURAZIONE R1.AI 1Ø200/S4.AO 1Ø200 O R1.AI 1Ø200 FAØ100/S4.AO 1Ø200 O R1.AI 1Ø200 FAØ125/S4.AO 1Ø200 O R1.AI 1Ø200/S3.AO 1Ø200 O R1.AI 1Ø200 FAØ100/S3.AO 1Ø200 O R1.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURAZIONE R2.AI 1Ø200/S4.AO 1Ø200 O R2.AI 1Ø200 FAØ100/S4.AO 1Ø200 O R2.AI 1Ø200 FAØ125/S4.AO 1Ø200 O R2.AI 1Ø200/S3.AO 1Ø200 O R2.AI 1Ø200 FAØ100/S3.AO 1Ø200 O R2.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURAZIONE AO XLN
SCHEMA ELETRICO
- LEGGENDA
DIMENSIONES
- CONFIGURACIÓN R1.AI RECT/S4.AO RECT
- CONFIGURACIÓN R2.AI RECT/S4.AO RECT
- CONFIGURACIÓN R1.AI 1Ø200/S4.AO RECT O R1.AI 1Ø200 FAØ100/S4.AO RECT O R1.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURACIÓN R2.AI 1Ø200/S4.AO RECT O R2.AI 1Ø200 FAØ100/S4.AO RECT O R2.AI 1Ø200 FAØ125/S4.AO RECT
- CONFIGURACIÓN R1.AI RECT/S4.AO 1Ø200 O R1.AI RECT/S3.AO 1Ø200
- CONFIGURACIÓN R2.AI RECT/S4.AO 1Ø200 O R2.AI RECT/S3.AO 1Ø200
- CONFIGURACIÓN R1.AI 1Ø200/S4.AO 1Ø200 O R1.AI 1Ø200 FAØ100/S4.AO 1Ø200 O R1.AI 1Ø200 FAØ125/S4.AO 1Ø200 O R1.AI 1Ø200/S3.AO 1Ø200 O R1.AI 1Ø200 FAØ100/S3.AO 1Ø200 O R1.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURACIÓN R2.AI 1Ø200/S4.AO 1Ø200 O R2.AI 1Ø200 FAØ100/S4.AO 1Ø200 O R2.AI 1Ø200 FAØ125/S4.AO 1Ø200 O R2.AI 1Ø200/S3.AO 1Ø200 O R2.AI 1Ø200 FAØ100/S3.AO 1Ø200 O R2.AI 1Ø200 FAØ125/S3.AO 1Ø200
- CONFIGURACIÓN AO XLN
ESQUEMA ELECTRICO
- LEYENDA

XVIISYSLOOP

APPENDIX / ANNEXE / ANLAGE / ALLEGATO / ANEXO

START UP FORM / FICHE DE MISE EN SERVICE

CUSTOMER INFORMATION:

Order number: .................................................................... Job name: .........................................................................

Contractor: ........................................................................... Installation address: .......................................................

................................................................................................

Contact: ................................................................................ %: ...................................................................................

INSTALLER INFORMATION:

Company: ............................................................................ Address: ...........................................................................

................................................................................................

Contact: ................................................................................ %: ...................................................................................

UNIT IDENTIFICATION:

SL15 SL20 SL30

SYSLOOP

Unit serial number: .........................................................................

COMMISSIONING INFORMATION:

Company: ............................................................................ Address: ...........................................................................

................................................................................................

Contact: ................................................................................ %: ...................................................................................

INSTALLATION CHECKING:

OBSERVATIONS:

...............................................................................................................................................................................................................................................

YES NO

Distortions or visible impact marks

Recommanded free clearance

Level installation

Power supply compatible with unit specications

State-of-art power cable section and wiring to

the unit

Ground cable is wired

Main electrical protection suits the unit

All electrical connections are correctly tightened

YES NO

Ground continuity on all pipes

Water connection, cleaning, rinsing, air bleed

Anti-frost protection of the water loop

Mesh lter at the inlet of the unit

Flowswitch cut-out checked

Condensate connection

Presence of a regulating valve

Presence of air lters

YES NO

Motorised water valve

Flow switch

Circuit breaker

YES NO

General fault return relay

µBMS supervision control unit

MODBUS supervision

Before initial commissioning, the compressor must

be unlocked.

Important: reinject the uid in the HP hose prior to

disconnecting the pressure gauges (risk of LP cuts)