IMO AXC 2014 04

15 Stoppage, disposal
DANGER! Live wires and connections!
Risk of injuries from electric current!
Have all electrical work done by a trained electrician only!
DANGER! Risk of injury if the fan falls down.
During dismantling, secure the assembly area against unauthorised access!
Use suitable lifting equipment and tting devices.
Do not stand underneath the load.
• To take the fan out of operation, disconnect the electrical connections from the mains.
• Take the motor out of operation according to the operating instructions from the manufacturer and
dispose of it as stated there.
• After the fan has nally been stopped, dispose of all the materials according to valid directives and
laws!
16 Spare parts
Defective fans must be completely replaced.
Repairs may only be done on the manufacturer‘s premises and by the manufacturer.
17 After-sales service
Our after-sales service is at your disposal under the following contact data:
Systemair GmbH
Seehöfer Str. 45
D-97944 Windischbuch
Technical Support:
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]
Homepage: www.systemair.de
55
AX - 01.2013
Axial, smoke and heat exhaust fans, series AX