IMO AXC 2014 04

10.1 Transport
The fans are supplied on wooden pallets they are packed in plastic foil. Transport the fan to the place of
assembly in its original packaging.
Do not transport the devices on the connection wire, the terminal box, the rotor, the protective grid or the
admission nozzle.
Load and unload the fan carefully, in order to avoid possible damage.
Use suitable lifting equipment. Use a four point suspension with straps in crane transport.
In transport and loading, pay attention to the weight of the fan.
Guidelines (without accessories) can be seen from the following table:
Upon receipt, carry out a visual check of the fan and examine the consignment for completeness.
10.2 Storage
NOTE
Risk of damage to the fan!
If it is stored for more than 3 months, turn the rotor by hand at intervals of 4 weeks.
In the packaging is intact (PE foil with space under the base) and without formation of condensation, the fans
can be stored out in the open for up to a month.
Unpacked fans may not be stored out in the open.
In dry, aired rooms without the risk of formation of condensation, the fans can be stored for a maximum of up
to 6 months.
If the period of storage is longer than 3 months, the rotor must be turned by hand at intervals of 14 days.
Storage temperatures:
–20 °C up to max. 60 °C
Size approx. weight with min./max. motor output in kg
AXC / AXR / -P, -D AXC-G
315 24 / 26 48 / 52
355 27 / 35 52 / 70
400 29 / 37 58 / 74
450 34 / 53 68 / 106
500 44 / 63 88 / 126
560 64 / 131 128 / 262
630 73 / 156 146 / 312
710 82 / 120 162 / 240
800 115 / 184 230 / 368
900 142 / 224 284 / 448
1000 179 / 289 358 / 578
1120 200 / 720 400 / 1440
1250 352 / 850 704 / 1700
1400 510 / 880 1020 / 1760
1600 615 / 1250 1230 / 2500
1800 1150 / 3270 2300 / 6540
2000 1910 / 3420 3820 / 6840
2240 2500 / 4000 5000 / 8000
42
Axial, smoke and heat exhaust fans, series AX