IMO AXC 2014 04
8 Mode of operation
The fans can be run in permanent operation at a maximum ambient temperature of 55 °C and also a maxi-
mum conveying temperature of 55 °C with ISO F motors.
Standard Fans with ISO H motors can be run at up to 100 °C.
For the operation of the motor, the embossed standard frequency is to be complied with.
9 Inspection
Before a fan is handed over to the customer, there is a trial run with the manufacturer as well as an operation
test necessary.
10 Transport, storage, assembly
DANGER! Risk of injury if the fan falls down.
Use suitable lifting equipment and tting devices.
Do not stand underneath the load!
NOTE Risk of damage to the fan or parts of the fan.
Do not transport the devices by the connection wire, the terminal box, the rotor, the
protective grid or the admission nozzle.
Use suitable lifting equipment and tting devices!
NOTE Risk of deformation of the fan!
Load and unload the fan carefully.
Pay attention to the transport arrows on the packaging.
Axial fan with accessories
airow direction
1. SG Protection guard
2. ESD-F Inlet cone
3. RSA Silencer
4. EV-AR/AXC, EVH (F400) exible
connection
5. REV (60°C) on/off switch
6. REV (re rated) on/off switch
7. MP (4x angel 90°) Mounting brackets
from size 1120
8. MFA Mounting feet
9. SD (4x) AV rubber mounts
10. FSD (4x) AV spring mounts
11. LRK Air operated damper
12. GFL Counterange
13. ZSD (4x) Spring mounts for tensile load
14. ABS Blowing out cowl
15. MPR Mounting ring up to size 1000
Vertical assembly Horizontal assembly
1
3
5
7
2
4
6
8
9
11
13
10
12
14
15
3
4
10
11
5
7
41
AX - 01.2013
Axial, smoke and heat exhaust fans, series AX