SYSHRW Engineering Data Manual (EDM HRW S 4GB)

SYSHRW
1
Description of Units
4 optimally compact case sizes, 10 models with a nominal
cooling capacity ratings ranging from 5.3 to 30.0 kW.
High efciency horizontal units with high COP values.
Easy access to the compressor, fan and electronic control box,
through wide removable panels.
In-line or perpendicular air blowing.
Condensate drain pan with anti-corrosion treatment by oven-
baked epoxy paint, equipped with a oat-type safety system
to protect against accidental condensate overow.
3-speed direct drive fan motor or belt driven fan with
variable pitch pulley.
Heat exchanger with brazed stainless steel plates on the
water/refrigerant side, for improved efciency.
Differential pressure switch for antifreeze protection as
standard.
Bi-Flow thermostatic expansion valve for a wide operating
range.
Stand-alone regulation by a STORM 2 electronic board which
can be congured to 4 operating modes using the RCX user
remote control, which comprises a digital display and essential
control keys.
The µBMS mini-supervision station, available as an optional
extra, enables 32 units in 15 zones to be monitored and
managed, with global or individual area programming.
SYSHRW 042, 048, 060 & 072
SYSHRW 027, 030 & 036
SYSHRW 019
SYSHRW 096 & 120
Finned coil
Air lter
20 or 25 mm
thick according
to the models
Condensate drain pan equipped with an overow
safety device
Electronic control box comprising the STORM 2 electronic
board, the RCX remote control and the electronic
components required for the correct operation of the unit
Cycle reversal valve
Removable fan-motor assembly
Liquid receiver
Bi-ow expansion
valve
Water/refrigerant
plate-type heat
exchanger
Compressor installed on
rubber anti-vibration
mounts
SYSHRW