IOM SYSCW AR R513A (IOM CWAR 02 N 1GB/12.21)

English
5SYSCW-AR R513A
2. INSPECTION AND STORAGE
The appliances are delivered fully assembled, factory tested and ready to operate.
Any modication to the units without the manufacturer’s prior approval, shall automatically render the
warranty null and void.
The following conditions must be respected in order to maintain the validity of the warranty:
² Commissioning shall be performed by specialised technicians from technical services approved by
the manufacturer.
² Maintenance shall be performed by technicians trained for this purpose.
² Only Original Equipment spare parts shall be used.
² All the operations listed in the present manual shall be performed within the required time limits.
3. WARRANTY
At the time of receiving the equipment carefully cross check all the elements against the shipping documents
in order to ensure that all the crates and boxes have been received. Inspect all the units for any visible or
hidden damage.
In the event of shipping damage, write precise details of the damage on the shipper’s delivery note and
send immediately a registered letter to the shipper within 48 hours, clearly stating the damage caused.
Forward a copy of this letter to the manufacturer or his representative.
Never store or transport the unit upside down. It must be stored indoors, completely protected from
rain, snow etc. The unit must not be damaged by changes in the weather (high and low temperatures).
Excessively high temperatures (above 60 °C) can harm certain plastic materials and cause permanent
damage. Moreover, the performance of certain electrical or electronic components can be impaired.
THE WARRANTY SHALL BE NULL AND VOID IN THE EVENT
OF NON-COMPLIANCE WITH ANY OF THE ABOVE CONDITIONS.
4. TECHNICAL SUPPORT AND AFTER-SALES SERVICE HOTLINE
For technical questions, work under warranty, commissioning, a manufacturer’s visit or repair quotations.
Our technical support and after-sales service hotline can be reached on:
² (0)891 700 407 in France
² [e-mail] for export customers
5. PRESENTATION
Following assembly of the units in the factory:
1. the electrical circuits are tested.
2. refrigeration circuits receive their operational refrigerant charge and are subject to pressurized leak
detection tests.
3. The SYSCW-AR units are tested.
These tests are conducted to guarantee the correct operation and quality of our products.
The SYSCW-AR units are produced in compliance with state-of-the-art design and manufacturing standards.
This guarantees their high performance and reliability as well as their compatibility with all types of air
conditioning installations. The unit, designed for an indoor mounted application, is not suitable for any uses
other than those specied in this manual.