IOM SYSCW AR R513A (IOM CWAR 02 N 1GB/12.21)

English
2
1
14 SYSCW-AR R513A
Models with a frontal air intake are equipped with four
height-adjustable feet to facilitate levelling the appliance.
We recommend that the appliances are installed at a
slight angle to favour condensate run-off.
We recommend the use of an angle bracket to attach the appliance to the wall.
When removing cabinet do not pull or lift it up by the discharge grilles, to avoid any damages on
articulated fasteners of the access doors.
Caution
10.3.2. CABINET REMOVAL
No tools are required to remove the casing. You just have to lift it
up slightly to release the olive-shaped attachment studs from the
buttonholes. Then pull the casing towards the front.
10.3.3. ANCHORING TO THE GROUND
SEE APPENDIX