IOM SYSCW AR R513A (IOM CWAR 02 N 1GB/12.21)

English
32 SYSCW-AR R513A
Equipment must not be returned without the permission of our After Sales Department.
To return the equipment, contact your nearest sales ofce (Refer to the § TECHNICAL SUPPORT AND AFTER-
SALES SERVICE HOTLINE, page 5) and ask for a "return form". The return form shall be sent with the
returned equipment and shall contain all necessary information concerning the problem encountered.
A part return does not constitute a replacement order. Therefore, a purchase order must be submitted
through your nearest distributor or regional sales ofce. The order should include the part name, part
number, model number and serial number of the unit involved.
Following our personal inspection of the returned part, if it is determined that the failure is due to faulty
equipment or workmanship, and the part is still under warranty, credit will be applied to the customer's
purchase order. All parts shall be returned to our factory, transportation charges prepaid.
19. WARRANTY CLAIM - MATERIAL RETURN PROCEDURE
The part number, the order conrmation and the unit serial number indicated on the name plate must be
provided whenever services or spare parts are ordered.
For any spare part order, indicate the date of unit installation and date of failure. Use the part number
provided by our spare parts department. If the part number is not available, provide a full description of the
part required.
20. ORDERING SERVICE AND SPARE PARTS ORDER
21. DISPOSAL
Information
For additional information on the recovery, reutilization and disposal of refrigerating systems, please
see NF EN 378-4, sect. 6.
The disposal of refrigerating systems and their component parts must be carried out in accordance with
applicable local and national regulations.
Used refrigerant which is not going to be reutilized must be treated as a waste material requiring safe
disposal.
The discharge of refrigerants is only permissible when there will be no harm to persons, property or the
environment, and provided it is in accordance with legal requirements.
Used oil that cannot be reprocessed must be stored in a suitable separate container and must be treated as
a waste material requiring safe disposal.
Other components of the refrigerating system which contain refrigerant and oil must also be disposed of in
an appropriate manner.
If necessary, you should seek the advice of a competent person on the disposal of waste refrigerant and oil
products.