IOM SYSAER R32 (IOM SYSAER R32 01 N 2GB)
Table Of Contents
- COUVERTURE PREMIERE IOM AER32 01-EN.pdf
- IOM AER32 01-N-GB_text.pdf
- CONTENTS
- 1. GENERAL RECOMMENDATIONS
- 2. INSPECTION AND STORAGE
- 3. WARRANTY
- 4. PRESENTATION
- 5. CONTENTS Of PACKAGE
- 6. DIMENSIONS
- 7. HANDLING
- 8. TECHNICAL SPECIFICATIONS
- 9. CONFIGURATION OF THE UNIT
- 10. OPTIONS
- 11. INSTALLATION
- 12. HYDRAULIC LINKS
- 13. WIRING DIAGRAM AND LEGEND
- 14. ELECTRICAL CONNECTIONS
- 15. COMMISSIONING
- 16. FINAL TASKS
- 17. IN CASE OF WARRANTY - MATERIAL RETURN PROCEDURE
- 18. ORDERING SERVICE AND SPARE PARTS ORDER
- 19. MAINTENANCE
- 20. TROUBLE SHOOTING
- ANNEXE AER32 01-N.pdf
- COUVERTURE DERNIERE IOM AER32 01-EN.pdf
English
Never submit the metal work (panels, posts) of the SYSAER R32 to handling constraints, as only its
base is designed for that purpose.
Caution
The forklift must be tted with forks with a minimum length of 2.5m.
Caution
11SYSAER R32
The good method of handling depends on the model of SYSAER R32 and its nal destination.
² Take care to avoid any rough handling or impacts when unloading and moving the appliance.
² Before hoisting into position, test lift to insure stability and balance. Avoid twisting or uneven lifting
of the units.
² The units shall be carefully inspected before unit installation to make sure this has not happened.
² ll these sections have been inspected before leaving the factory. It is important to insure that no
bolts, screws or other xing system are loosened or missing before the commissioning.
7.3. MANUTENTION GENERALITES
7.3.1. HANDLING WITH A FORKLIFT
When a forklift is used to handle the SYSAER R32 units, lift them only along their width.
Place a safety wedge between the unit base and the fork lift truck to avoid damaging the unit’s structure
and casing.