Handbook CFC AGS 202205

3/39 | CFC-AGS
Description
CFC-AGS is a cassette used as a terminal device for ventilation with high efficiency particulate filter. It is mainly
intended for ventilation of spaces with requirements for high grade of air cleanness like surgery rooms and medical
intensive care units, laboratories, industrial clean production sites etc.
CFC-AGS can be used for air supply as well as for air extract.
Highlights
• Adaptability for multiple types of ceiling installation
• Low height profile for ceilings with limited space
List of Accessories
• PP-CFC-A, CAP-CFC-A, ADQ-CFC-A, VVKR-CFC-A, VVKN-CFC-A: Front Diffuser Panels
• APS..., APT..., APG: Adapter Ledges
• CFC-GF-14: HEPA Filter with Gel Gasket
Design
CFC-AGS is made from carbon steel sheet. The casing is spot welded and hermitized by polymer sealant. The duct
connection is rectangular with flange. The casing is air-tight on the duct connection side as well as on the room side.
The air tightness of the casing is tested under static pressures of up to 600 Pa by the soap bubble method, eventually
by the smoke method.
High efficiency filters of the class from E11 up to U18 can be used with CFC-AGS. A knife sealing surface is prepared in
the cassette to attach the gel gasket of the filter.
The cassette is equipped by a pressure measurement nipple for the measurement of the actual filter resistance
(clogging detection).