DataSheet CAP CT201811

2 / 9 | Nozzle Diffusers
Design
The CAP-CT body is made from galvanized steel, composed of the plenum box with a vertically from top oriented
rubber gasket sealed circular connection and diffuser plate with polymer nozzles, attached by permanent magnets.
The nozzles can be rotated by 360° in the plane of the diffuser plate. The proper directional adjustment of the
individual nozzles results in the desired air discharge pattern. The connection spigot is equipped with an air ow
adjustment damper and the air ow measurement probe tappings for air supply and extract. All these parts are
accessible from outside, so measurement and adjustment require no dismantling of the diffuser.
For the installation of the diffuser, there are two thread nuts in the upper part of the plenum box. They are t
for xing on the suspended thread bar.
Fig. 2: Components of CAP-CT
Product Parts
1 Plenum box
2 Connection with rubber gasket
3 Damper (adjustable from outside)
4 Supply air measurement tapping
5 Extract air measurement tapping
6 Nut M8 for xing on thread bar
7 Magnets to hold diffuser plate
8 Diffuser plate
9 Nozzles
Legend
7
1
9
5
2
8
6
4
3