DataSheet CAP C201902

Table Of Contents

4 / 16 | Nozzle Diffusers

Design

The CAP-C body is made from galvanized steel, composed of the plenum box with a sidewards oriented rubber gasket

sealed circular connection and diffuser plate with polymer nozzles, attached by permanent magnets. The nozzles

can be rotated by 360° in the plane of the diffuser plate. The proper directional adjustment of the individual nozzles

results in the desired air discharge pattern. The connection spigot is equipped with an air ow adjustment damper

and the air ow measurement probe tappings for air supply and extract. All these parts are accessible from outside,

so measurement and adjustment require no dismantling of the diffuser. For the installation of the diffuser, there is

a thread nut in the upper part of the plenum box. It is t for xing on the suspended thread bar.

Fig. 2: Components of CAP-C

Product Parts

1 Plenum box

2 Connection with rubber gasket

3 Damper (adjustable from outside)

4 Supply air measurement tapping

5 Extract air measurement tapping

6 Nut M8 for xing on thread bar

7 Magnets to hold diffuser plate

8 Diffuser plate

9 Nozzles

Legend

2 13