IMO DVG

DVG 16.08.2021 27
The Manufacturer:
Systemair d.o.o.
Špelina 2
SI-2000 Maribor
Tel.: [phone]
certifies herewith that the following products:
Smoke and heat extract fans, type DVG/F400*, DVG-EC/F400*
Thermo roof fans, type DVG-T, DVG/120
ensure all relevant regulations of following directives:
DVG/F400
DVG-EC/F400
DVG-T
DVG/120
EC Machinery Directive (2006/42/EC)
x
x
x
x
Electromagnetic compatibility directive (2014/30/EU)
x
x
x
x
Low Voltage Directive (2014/35/EU)
x
x
x
x
Regulation (EU) No 305/2011 (CPR)
x
x
----
----
Commission Regulation (EU) No 2019/1781 (Ecodesign)
x
----
----
x
Commission Regulation (EU) No 327/2011 (Fans)
x
x
----
x
Commision Regulation (EU) No 1253/2014
x
x
----
x
Applied harmonized standards, in particular:
DVG/
F400
DVG-
EC/F400
DVG-T,
DVG/120
EN ISO
12100
Safety of machinery - General principles for design - Risk assess-
ment and risk reduction
x
x
x
EN ISO
13857
Safety of machinery - Safety distances to prevent hazard zones
being reached by upper and lower limbs
x
x
x
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
x
x
x
EN 12101-3
Smoke and heat control systems – part 3: Specification for powe-
red smoke and heat exhaust ventilators
x
x
----
*complies with the provisions of the Test reports, issued by the LGAI Technological Center, S.A., Bellaterra
(Barcelona), No. 09/100216-502 from 12. 06. 2009 and No. 11/2673-1035 from 14. 06. 2011(DVG), No. 11/3662-
2628, 2629 from 09. 01. 2012 and No. 12/3662-441 from 19. 03. 2012 (DVG-EC), No. 14/3662-456 from 25. 03. 2014
(DVG, DVG-EC)
Note1: The compliance with EC Machinery Directive and EN ISO 13857 refers to the mounted protective guards on
the inlet of the fan, as far they are in the extent of delivery. For the fully accordance with mentioned requirements
(protective guards or safety assurance in other way) the performer is responsible.
Note2: Compliance with EMC Directive 2014/30/EC only relates to this product if it has been connected directly to the
customary electricity mains. If this product is integrated into a system or completed and operated with other compo-
nents (e.g. regulation and control appliances), the manufacturer or operator of the overall system is responsible for
compliance with EMC Directive 2014/30/EC.
Maribor,
16.08.2021
Date
Anton Zupančič, Director
EU – Declaration of Conformity