251 14 EC User instructions GB SV DA NO

adjustment hatch for basic flow. Replace
the damper hatch before installing the coo-
ker hood, see separate instructions
Assembly of connecting sleeve
coupling with damper
Fig. 3
The outlet air terminal device is supplied,
fitted inside the cooker hood.
The damper shaft A should be positioned in
the eye under the damper cover; see Fig. 3.
Make sure that the tabs B end up under the
edge of the plate and that the device snaps
into place.
Connection to ventilation unit
For connection to ventilation unit, see sepa-
rate instrucktions.
Assembly
Fig. 4
The cooker hood can be positioned under
or built into a row of cupboards, Fig. 4.
Fig. 5
The cooker hood can also be installed with
the help of brackets that can be purchased
as an additional option,
Fig. 5. Instructions for the installation of op-
tional items are enclosed with the items.
Adjustment of fan speed
Fig. 6
It is possible to adjust the minimum and
normal speed by internal potentiometers lo-
cated to the right in the lamp compartment.
Remove the lamp lens, Fig. 11 . The poten-
tiometers are adjusted by means of a screw
driver as shown inFig. 6. H1 controls basic
flow and speed 1. H2 controls air flow for
speed 2.
991.0358.150/126051/2018-10-02 19