251 14 EC User instructions GB SV DA NO

INSTALLATION
The cooker hood is designed for installation
under a ventilation unit. The cooker hood is
equipped with a fluorescent tube and metal
mesh filter. Installation, use, care, mainte-
nance, etc., are described in these
instructions.
TECHNICAL INFORMATION
Fig. 1
Width 60 cm
Dimensions see Fig. 1
Electrical
installation
230 V ~ earthed
Lighting Fluorescent tube 11 W,
socket 2G7
Voltage 1,5–10 V
Duct
connection
Ø 125 mm
Options
Bracket set.
INSTALLATION
Fixing parts, screws for mounting, etc. are
supplied with the cooker hood.
Ventilation duct
The duct between cooker hood and unit
should be as short as possible to obtain a
good capacity. Use a recommended duct.
The duct must be accessible for changing
or cleaning (see chapter "Maintenance and
cleaning").
Electrical installation
Fig. 2
1. Cooker hood
2. Main supply, special plug Ensto
NAC31SH.W
3. Control signal cable, special plug Ensto
NAC41SH.W
A
Brown
B
Blue
C
Yellow/Green
D
Black
The cooker hood is equipped with main
supply and control signal cable with special
plugs for a ventilation unit . The junction
box should be accessible after installation
is complete.
See wiring diagram, Fig. 2.
Replacement of damper hatch
N.B. Only applicable where basic ventilation
takes place via the cooker hood.
The cooker hood is fitted with a sealed
damper. If the cooker hood is used in a kit-
chen that does not have separate basic
flow ventilation, it must be fitted with an
18
991.0358.150/126051/2018-10-02