499247 AJR OIPM

499247
6 | AJR Jet Fan
4.4 Storage
• Do not stack the fans on top of one another after uncrating.
• Use hoisting and/or lifting equipment that is suitable for the weight to be vertically moved
Preconditions:
• Store the devices in a clean, dry and vibration-free environment.
• Storage temperature should be between –20°C and 60°C.
Storage for more than 3 months:
• Turn the impeller at least 10 revolutions, once per month.
• Please ensure that the impeller is at a different position afterward.
Storage for more than 12 months:
• Contact Systemair. We recommend an inspection by Systemair or its representative before commissioning.
4.2 Delivery
Each fan leaves Systemair in proper mechanical and electrical condition. The fan should remain in the original packaging until the nal
delivery to the installation site.
4.2.1 Checking delivery
• Unpack the fan carefully.
• Only remove the packaging shortly before assembly.
• Wear protective equipment during all work in the vicinity of the fan, see 2.2 Personal protective equipment
• Check the packaging and the fan for transport damage. Any findings should be noted on the cargo manifest.
• Check completeness of the delivery.
4.3 Transport
4.3.1 Safety information
• During open transport, please make sure that water cannot penetrate the fan housing
• We recommend transporting the fan to the installation site in the original packaging.
• Load and unload the fan carefully.
• Use hoisting or lifting equipment that is suitable for the weight to be hoisted.
• Use the fan packaging exclusively as transport protection and not as a lifting aid.
Warning
When opening the transport packaging, there is a risk of damage
from sharp edges, nails, staples, splinters, etc.
Warning
Electrical or mechanical hazards due to re, moisture, short circuit or
malfunction
Caution
If transported without care during loading and unloading, the fan and
internal parts may be damaged
Warning
Risk of injury to personnel and damage to the fan.