Manual SUE003
Table Of Contents
- 1 General information
- 2 Important safety information
- 3 Warranty
- 4 Delivery, transport, storage
- 5 Description
- 6 Name plate and type key
- 7 Accessories
- 8 Installation
- 9 Electrical connection
- 10 Commissioning
- 11 Operation
- 12 Troubleshooting/maintenance/repair
- 13 Cleaning
- 14 Deinstallation/dismantling
- 15 Disposal
- 16 Product fiche SUE
- 17 Commissioning Report
4
|
Description
5 Description
5.1 Intended use
• The SUE is intended to provide rooms with pre-heated air.
• The fans are intended for installation in ventilation systems. They can be installed both in duct systems and also with
free suction via a suction-side contact protection grille. Free discharge via a contact protection grille is also possible.
• The fan is suitable for conveying clean air.
5.2 Incorrect use
Incorrect use refers mainly to using the fan in another way to that described. The following examples are incorrect
and hazardous:
• Conveying of explosive and combustible media
• Conveying of aggressive media
• Operation in an explosive atmosphere
• Operation without filter.
• Operation without duct system or protection grille
• Operation with the air connections closed
• Installation outside without weather protection
5.3 Technical data
Max. ambient temperature [°C]
40
Min. ambient temperature [°C]
-20
Max. temperature of transported air [°C]
50
Sound pressure [dB] see data sheet, available in our online catalogue
Voltage, current, frequency, enclosure class, weight see name plate of the fan
The motor data can be found on the name plate of the motor, or in the technical documents of the motor
manufacturer.
The data on the name plate of the fan apply to "standard air" according to ISO 5801.
The SUE consists from the following components:
Fan with EC motor, Duct heater, TCA temperatur control module, S-5EC step switch, Filter, TFK Temperature sensor
Table 2 Dimensions SUE
199495 | 003