Manual IHMC6 3

IHMC6-3
13
CONFIGURATION OPTIONS
The IHMC6-3 has been designed and tested to allow each controller to be mapped to
either 2 channels (2 power level settings per 2 outputs) or 1 channel (1 power level
setting per 2 outputs).
Please note that no mapped channels should appear with the same channels
numbers.
Here are some examples using 3x IHMC6-3 on a 1 phase supply.
Example 1
Control 1 Control 2 Control 3
Switch setup
1000
Switch setup
1100
Switch setup
0111
Mapped
channels 1,2,3
Mapped
channels 4,5,6
Mapped
channels all 7
TABLE A TABLE A TABLE B
Example 2
Control 1 Control 2 Control 3
Switch setup
1000
Switch setup
0100
Switch setup
0101
Mapped
channels 1,2,3
Mapped
channels all 4
Mapped
channels all 5
TABLE A TABLE B TABLE B
Option 2 shows 9 Power units offering 9 channels
which can vary from 1 to 10 (note all 3 channels
within the power unit vary at the same output level)
Option 1 shows 3 Power units offering 9
individual channels of 2kW that can be
varied from 1 to 10.
Option 1
18kW
Option 2
54kW
1 2 3
4 5 6
7 8 9