FC101 Design Guide

Parameter Range Default Usage

Parameter 20-94 PI Integral

Time

0.1–999.0 s 999.0 s Enter the process controller integral time. Obtain quick

control through a short integral time, though if the

integral time is too short, the process becomes unstable.

An excessively long integral time disables the integral

action.

Parameter 30-22 Locked Rotor

Protection

[0] O

[1] On

[0] O

–

Parameter 30-23 Locked Rotor

Detection Time [s]

0.05–1.00 s 0.10 s

–

Table 6.5 Set-up Wizard for Closed-loop Applications

Motor set-up

The motor set-up wizard guides users through the needed motor parameters.

Parameter Range Default Usage

Parameter 0-03 Regional

Settings

[0] International

[1] US

0 –

Parameter 0-06 GridType [0]–[132] see Table 6.4. Size related Select the operating mode for restart after reconnection of

the frequency converter to mains voltage after power-

down.

Programming Design Guide