FC101 Design Guide

Bit 14, Current OK/limit exceeded

Bit 14 = 0: The motor current is lower than the current

limit selected in parameter 4-18 Current Limit.

Bit 14 = 1: The current limit in parameter 4-18 Current Limit

is exceeded.

Bit 15, Thermal level OK/limit exceeded

Bit 15 = 0: The timers for motor thermal protection and

thermal protection are not exceeded 100%.

Bit 15 = 1: 1 of the timers exceeds 100%.

RS485 Installation and Set-... Design Guide

7 7