Installation , Operation and Maintenance Instructions Genius

Access Rights Log on Log on
Enter password: ****
Actual level: none
Log off Log off
No
Actual level: none
Change password Change password to level:
None
New password: ****
Activate rooms:
Service settings
Access Rights Heat pump Heat pump:
Modbus address = 1
Room designations Log on 1)
Enter password 1111
Activate Rooms Number of rooms
1 .. 10
Room 1:
Modbus address = 197
Language Room 2:
Modbus address = 39
etc.
After activation
of the rooms
Cong. Room 1 Room 1
Setpoint temp.: 20.0°C
Deviation+: 3°C
Deviation-: 3°C
Room 1
P-band: 3°C
I-band: 3°C
Room 1
Sensor
Internal room sensor
Room designation
Room 1
After activation
of the rooms
Denition Room 2 to 10 as Room 1
Language
Choose language
English
1) This window will not be shown when rooms are already activated. To activate further rooms, use the log on via access rights and select room denitions.
94
Control via Display
Genius - V 1.0