Installation , Operation and Maintenance Instructions Genius
10.10 Chart Function
" Click on the chart link. This can be opened from all pages.
» The Chart page opens.
The Chart function shows all status, temperatures etc. and saves them. Almost all temperatures, status, demands etc. can be recorded.
Each recording is limited to 8 values per recording (time window).
Figure 27: see Chart
Signal Scale Last value Display
Actual temperature left 25.0 °C
Actual temperature left 24.1 °C
Actual temperature left 24.7 °C
Actual temperature left 45.5 °C
Der Status is dened by the following digit sequence:
0 Off 1 Rotor operation
2 Heating 3 Cooling
4 Night cooling 5 Rotor defrosting
6 Hot water generation 7 Emergency operation
8 Setback operation 9 Holiday operation
10 Legionella mode 11 Defrost heat pump
12 Rotor alarm 13 Heat pump alarm
14 Switch-off point
81
Genius - V 1.0
Operation/Control via Internet/App