Installation , Operation and Maintenance Instructions Genius

10.7.2 Time Program
10.7.2.1 Normal Operation
Heating/Cooling/Ven-
tilation
Start Stop Start Stop
Monday 00:00 24:00 00:00 00:00
Tuesday 00:00 24:00 00:00 00:00
Wednesday 00:00 24:00 00:00 00:00
Thursday 00:00 24:00 00:00 00:00
Friday 00:00 24:00 00:00 00:00
Saturday 00:00 24:00 00:00 00:00
Sunday 00:00 24:00 00:00 00:00
Holiday 00:00 24:00 00:00 00:00
Hot Water Start Stop Start Stop
Monday 00:00 24:00 00:00 00:00
Tuesday 00:00 24:00 00:00 00:00
Wednesday 00:00 24:00 00:00 00:00
Thursday 00:00 24:00 00:00 00:00
Friday 00:00 24:00 00:00 00:00
Saturday 00:00 24:00 00:00 00:00
Sunday 00:00 24:00 00:00 00:00
Holiday 00:00 24:00 00:00 00:00
Both time programs, Heating/Cooling/Ventilation and Hot water, use each two adjustable time slots for every week day. Depending on
the settings, the corresponding function runs within the time slots in normal operation. Outside these time slots, the unit is in setback
operation.
NOTE
When using a circulation pump, it must be externally controlled (see „13.2.3 Hot Water Generation“ page 102).
10.7.2.2 Setback Operation
Setback type and value are different.
Ventilation The ventilation stage can be set on page Actual Value/Setpoint.
Heating The setback temperature can be set on page Settings.
Cooling Cooling is switched off during setback.
Hot water generation Hot water generation is switched off during setback.
Time program The time program "Hot water" is only available if the Setting Individual has been
selected in the settings specied for the Time program.
If Automatic is selected, the time program runs in the background and depends on
the heating or cooling program (winter/summer), with the difference that the hot
water starts for comfort reasons an hour before the normal operation of heating/
cooling.
(see Settings, Hot water, Preset time program)
60
Operation/Control via Internet/App
Genius - V 1.0