Installation , Operation and Maintenance Instructions Genius

10.2 Access - Log on
NOTE
• All parameters can also be set by the display (see „11 Control via Display“ page 87).
10.2.1 Log on User Level
" Open the app on your smartphone or open the application on your PC.
" Enter "guest" in the eld Password for user level.
" Select Save password.
" Click log on
» The Genius overview screen will be displayed.
You are in the user level.
10.2.2 LoggingintotheServicelevel(onlyforspecialistpersonnel!)
" Log on with the service password.
» You are in the service level and you have access to the control.
10.3 Service Level Settings
The service level consists of the following pages (tabs):
• Overview: Here you see the most important setpoint and actual values of your combi unit.
• Actual value / Setpoint: Here you can see important values (black values) or set values (blue values)
• Alarm status: You can see an overview of all faults and alarms. You also can conrm or troubleshoot alarms here. (see „8.1 Alarm Sta-
tus“ page 31).
• Input/Output: This tab shows the analogue and digital inputs and outputs as well as the main parameters of the heat pump.
• Time program: Here you set the timer programs (heating / cooling / ventilation, hot water).
• Settings: Here you can see and adjust the setpoints and actual values for air volume control, hot water, night cooling, lter alarm and
room denitions.
• Manual/Auto: Manual control of the fans, heat pump and PTC elements of the individual rooms.
48
Operation/Control via Internet/App
Genius - V 1.0