Installation , Operation and Maintenance Instructions Genius

Remedy a fault:
1. Select the specic message
2. Click the symbol Conrm.
The alarm must be conrmed manually to stop indicating it.
Remedying faults: A , B and C alarms
" Fix the alarm or let it be xed by a service technician.
" Select the alarm.
" Click the symbol Conrm.
" Select the sum alarm.
" Click the symbol Conrm.
The alarm and the sum alarm must be conrmed manually one after another to stop indicating.
If more alarms are active in the same time, the need to be conrmed one after another.
" Check the complete alarm list in case of an alarm and conrm all active alarms.
NOTE
If multiple error messages are activated in parallel, this does not necessarily mean that the system has a fatal error.
One error can trip several messages at the same time.
Meaning of the symbols:

Conrmed Click the symbol Conrmed to conrm the alarm.

Block Click the symbol Blocked to block the alarm. Only possible in the service level.

Released Click the symbol Released to release the alarm. Only possible in the service level.
NOTE
There are some error messages which need to be conrmed several times.
An Alarm can rst switch to Cancellation before it resets to Normal mode.
8.1.4.1 ConrmorBlockAlarms
NOTE
Blocking of alarms can cause uncontrollable malfunctions.
" Use this function only in exceptional cases and after consulting a specialist company or specialised personnel!
This is only possible in the service level as well as the release of blocked alarms.
Conrmed alarms Conrmed alarms will remain on the alarm list until the alarm input signal resets.
Blocked alarms Blocked alarms remain on the alarm list until the alarm has reset and the block has
been removed. New alarms of the same type will not be activated as long as the
block remains.
33
Genius - V 1.0
Maintenance / Remedying Faults