Installation , Operation and Maintenance Instructions Genius

4.3 Technical Data
NOTE
If larger houses/residential units (at a correspondingly lower heating load, e.g. for passive houses) are to be equipped
with the Genius combi-unit, there is an option to use stronger fans to ensure the required air exchange. Please get in
touch with Systemair early on in the planning phase).
Genius
Unit Data
Performance data
max. heating capacity kW 6
max. cooling capacity kW 4
Power PTC elements (Accessories) W each 500
Power heating rod kW 3
Coefcient of performance for A7/L40 3.3
Coefcient of performance for A2/L40 2.9
Coefcient of performance for A-7/L40 2.3
Electrical data
Max. power input supply and extract air fan W 80 (standard version)
170 (version L)
Max. power input secondary air fan W 170
Max. input power compressor W 1800
max. power input fans module ventilation W each 80
max. power input fan module heat pump W 170
Power input storage charge pump W 6 ... 28
Supply voltage V 230
Frequency Hz 50
Protection class IPX2
Ventilation
Filter class outdoor air F7
Filter class extract air G4
Filter class secondary air G4
Air ow rate (standard operation) m³/h 180 (standard version)
230 (version L)
max. air ow heating/cooling (secondary air) m³/h 550 (standard version)
600 (version L)
Fresh air heat recovery % up to 85
Dimensions / Weight
Width mm 865
Height mm 2070
Depth mm 750
Weight ventilation module kg 75
Weight heat pump module kg 60
Weight basic module/hot water kg 170
Total weight, empty kg 305
Total weight, lled kg 460
Fittings
Table 1: Technical Data combi unit Genius
14
Description of the System
Genius - V 1.0