126181 MANUAL 722 10 TENDER
Table Of Contents
- Spiskåpa Tender 722–10/B
- SV Bruksanvisning
- Emhætte Tender 722–10/B
- DA Betjeningsvejledning
- Cooker hood Tender 722–10/B
- GB User instructions
- Kjøkkenhette Tender 722–10/B
- NO Bruksanvisning
- Fig. 13
- Fig. 14
- Fig. 15
- Fig. 16
Hang the cooker hood and adjust it
horizontally
Secure it in place with a screw F.
Reinstall the fat filter.
Connection to exhaust flue
Connect the cooker hood with a pipe or
tubing Ø 160 mm. If the connection is Ø
125 mm, a reducing coupling sleeve must
be used.
Fig. 5
Attention!
When using connecting tubing, the tub-
ing must be stretched and installed di-
rectly adjacent to the connection, Fig. 5.
Mounting the chimney
Fig. 6
Chimney upper section
Gently bend the two sides of the upper
chimney section outwards and hook them
on the brackets D. Make sure they are
secure.
Attach the sides to the upper brackets us-
ing screws G (2.9 x 9.5 mm), Fig. 6.
Chimney, lower section
Gently bend the two sides of the lower
chimney section outwards and lower it on
to the hood. Hook the bottom of the chim-
ney section into place. Make sure they are
properly in position.
22
991.0433.861/126181/2016-02-08